Router Bits

Australia's largest range for router bits for professionals and hobbyists.

Router bits supplied Australia wide by CNC RouterBits.com.au. Solid carbide high performance router bits, routing cutters and routing tools for CNC routers. Compression cutters, end mills, profiling bits for timber, plastic, non-ferrous metals, composite material and more. Our routing bits, routing tools and routing cutters include single flute, two flute, up spiral, down spiral, straight edge, V cutters, flat bottom tools and profile cutters.

Econo Range Cabinetmakers Compression & Finishing Cutters

Starting at: $64.60

This economy range of solid carbide compression and finishing cutters provides excellent results in timber and timber laminate products.
Compression cutters are ideal for timber laminates such as whiteboard and the low helix finishing cutters are designed for maximised smooth finish with upward chip removal
.
more
3 Flute Low Helix Finisher

Starting at: $79.50

3 Flute Low Helix Finisher. Designed for perfect balance and smooth finish over a wide speed range. more
2 Flute Upward Spiral

Starting at: $21.00

2 Flute Upward Spiral more
2 Flute Compressor Up/Down - MaxLife - 3/4" Cut Edge Diameter, 47mm Cut Edge Length, 3/4" Shank, 101mm Overall Length

$408.90

3/4" Cut Edge Diameter, 47mm Cut Edge Length, 3/4" Shank, 101mm Overall Length

Solid Carbide Two Flute Max Life Compression Bit for Double Sided Laminates & Veneers. Designed for maximum life when cutting abrasive materials such as melamine or other laminated materials.

**Special Price**
more
2 Flute Chipbreaker Finisher

Starting at: $147.00

2 Flute Chipbreaker Finisher for faster feed rates than a conventional two flute with a smooth finish. more
3 Flute Tuff Core, Marathon, MaxLife Compressor

Starting at: $174.90

3 Flute Compressor. Up/Down design for high feed rates and optimum edge finish on both sides of laminated material. more
Vee Groove Cutters

Starting at: $35.60

V Groove Cutters. A versatile cutter for decorative vee grooves and chamfering. Also for mitre joints and box fabrication. Two flute carbide tipped. more
4 Flute Compressor

Starting at: $290.00

4 Flute Compressor. Fine finishes at high feed rates. more
2 Flute Straight Edge

Starting at: $24.50

2 Flute Straight Edge more
Aluminium Cutters (recommended)

Starting at: $21.00

Solid carbide cutters specifically for cutting aluminium, aluminium composites and other non-ferrous materials. Available in single & double flutes in up and down cut. You will get a different edge finish depending on whether you use climb or conventional milling, also known as forward and reverse cutting. For best results we recommend that initially you do some test cuts and see which edge has the best result, then adjust your toolpath accordingly. NOTE: Image is for illustration purposes only - please see product descriptions for details of flute type. more