Routing Aluminium, Brass etc

Router bits, end mills and routing tools for cutting aluminium and non-ferrous materials

Looking for bits for routing brass and other non-ferrous materials? View our range below.

Our range of specially selected router bits for cutting aluminium and non-ferrous materials will give you great results. Super sharp with good chip clearance helps to reduce cutting forces and heat build up. Generally speaking, routing aluminum will be more successful when a mist cooling system or cold air gun is used whilst cutting.


7 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Aluminium cutter

    Aluminium Cutters (recommended)

    Starting at: $22.50

    Solid carbide cutters specifically for cutting aluminium, aluminium composites and other non-ferrous materials. Available in single & double flutes in up and down cut. You will get a different edge finish depending on whether you use climb or conventional milling, also known as forward and reverse cutting. For best results we recommend that initially you do some test cuts and see which edge has the best result, then adjust your toolpath accordingly. NOTE: Image is for illustration purposes only - please see product descriptions for details of flute type. more
  2. 2 Flute Upward Spiral - 6.35mm diameter, 19mm cut edge length, 6.35mm shank
    2 Flute Upward Spiral router bit for Aluminium, Non-ferrous materials, composites

    **Special Price**

    more
  3. 2 Flute Downward Spiral

    2 Flute Downward Spiral

    Starting at: $47.10

    2 Flute Downward Spiral cutters are suitable for use with a variety of materials. The downward flute provides better hold down and can reduce vibration when cutting thinner sheets. more
  4. 2 Flute Upward Spiral

    2 Flute Upward Spiral

    Starting at: $22.50

    2 Flute Upward Spiral more
  5. Single O Flute Upcut Spiral

    Single O Flute Upcut Spiral

    Starting at: $38.40

    Single O Flute Upcut Spiral designed to rout at very high feed rates with an exceptional finish. You will get a different edge finish depending on whether you use climb or conventional milling, also known as forward and reverse cutting. For best results we recommend that initially you do some test cuts and see which edge has the best result, then adjust your toolpath accordingly. more
  6. Single Flute Upcut Spiral

    This economy range of solid carbide cutters provide excellent general purpose high speed cutting.

    Up Spiral Cutter with good stock removal and increased chip evacuation for Aluminium.

    Buy in bulk and save!.

    more
  7. 2 Flute Upward Spiral

    This economy range of solid carbide cutters provide excellent general purpose high speed cutting. The Two Flute Spirals with extra flute length, are designed for maximised smooth finish with upward chip removal.

    Buy in bulk and save!.

    more

7 Item(s)

per page

Grid  List 

Set Descending Direction