Aluminium Cutters (recommended)

Be the first to review this product

Quick Overview

Solid carbide cutters specifically for cutting aluminium, aluminium composites and other non-ferrous materials. Available in single & double flutes in up and down cut.

You will get a different edge finish depending on whether you use climb or conventional milling, also known as forward and reverse cutting. For best results we recommend that initially you do some test cuts and see which edge has the best result, then adjust your toolpath accordingly.

NOTE: Image is for illustration purposes only - please see product descriptions for details of flute type.

Aluminium cutter specifications

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Aluminium cutter
  • Aluminium cutter specifications
  • V Groove Cutter
Short Description SKU OAL SHK CED CEL DEPTH Price Qty Add to Cart
Single Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. 33050 60 5 5 16
$64.50
Solid carbide two flute upward spiral for cutting aluminium, brass or copper. Can also be used for wood composites and fibreglass. 2FS3 40 3.175 3 10
$23.70
Single O Flute Upcut Spiral for Aluminium designed to rout at very high feed rates with an exceptional finish. 63-918 64 4 4 8
$93.20
Solid carbide two flute upward spiral for cutting aluminium, brass or copper. Can also be used for wood composites and fibreglass. 2FS1.2 40 3.175 1.2 6
$22.50
Single O Flute Upcut Spiral for Aluminium 63-946 76 8 8 38
$175.10
Solid carbide two flute upward spiral for cutting aluminium, brass or copper. Can also be used for wood composites and fibreglass. 2FS1.5 40 3.175 1.5 6
$22.50
Single O Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. 63-622 63 6.35 6.35 19.05
$95.60
Single O Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. 63-610 51 6.35 3.175 12.7
$88.30
Single Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. 33060 50 6 6 15
$70.00
Single Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. 33030 30 3 3 8
$50.30
90 degree with 3mm flat V groove 8mm upcut spiral routing Alucobond, Alpolic, ACM, solid aluminium and similar materials. Able to cut in a single pass with high feed rate. 030890 60 8 8 15
$104.00
Solid carbide two flute upward spiral for cutting aluminium, brass or copper. Can also be used for wood composites and fibreglass. 2FS2 40 3.175 2 8
$23.70
Single O Flute Upcut Spiral for Aluminium 63-948 76 10 10 30
$212.40
Single O Flute Upcut Spiral for Aluminium designed to rout at very high feed rates with an exceptional finish. 63-924 64 6 4 20
$126.40
Single O Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. 63-629 63 7.9375 (5/16") 7.9375 (5/16") 14.28 (9/16")
$152.20
Single O Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. Highly recommended for polypropelene, also suitable for Aluminium Composite Material 63-614 51 6.35 4.76 9.5
$88.30
Single O Flute Downcut Spiral Produces a smooth edge, with a very good chip removal. For Aluminium cutting 62-606 51 6.35 3.175 6.35
$72.00
Single Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. 33040 60 4 4 12
$56.70

90 degree with 3mm flat V groove 8mm upcut spiral routing Alucobond, Alpolic, ACM and similar composite materials.
Cheaper in packet of 10!

030890pkt 60 8 8 15
$1,040.00
Solid carbide two flute upward spiral for cutting aluminium, brass or copper. Can also be used for wood composites and fibreglass. 2FS2.5 40 3.175 2.5 8
$23.70
Single O Flute Upcut Spiral for Aluminium designed to rout at very high feed rates with an exceptional finish. 63-912 64 6 3 8
$118.20
Single O Flute Upcut Spiral for Aluminium designed to rout at very high feed rates with an exceptional finish. 63-938 64 6 6 20
$132.00
2 Flute Upward Spiral router bit for Aluminium, Non-ferrous materials, composites

**Special Price**

C8-203-08 63 6.35 6.35 (1/4") 19
$52.60
Solid carbide two flute upward spiral for cutting aluminium, brass or copper. Can also be used for wood composites and fibreglass. 2FS1 40 3.175 1 5
$22.50
Single O Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. Highly recommended for polypropelene 63-620 51 6.35 6.35 9.5
$88.00
Single O Flute Upcut Spiral Produces a smooth edge, with a very good chip removal. For Aluminium cutting 63-606 51 6.35 3.175 6.35
$83.10

Details

Solid carbide cutters specifically for cutting aluminium, aluminium composites and other non-ferrous materials. Available in single & double flutes in up and down cut.

Additional Information

Material Aluminium, Non-ferrous metals