Details
Roland cutting blades for drag knife / swivel knife tool
Use the handy chart below to help decide on the correct blade for your application. Remember, the greater the offset, the less ability a blade has to cust very small shapes or letters. Thicker materials also tend to be more abrasave and can reduce blade life.
Material | ZECU1005 | ZECU1715 | ZECU3075 | ZECU3100 |
Angle (degrees) | 45 | 17 | 32 | 60 |
Offset (mm) | 0.25 | 0.25 | 0.75 | 1.00 |
Standard Vinyl <=3mm | Y | |||
Thick Vinyl >=3mm | Y | |||
Cardboard <=2mm | Y | Y | ||
Sandblast | Y | Y | Y | |
Reflective | Y | Y | ||
Magnetic | Y | Y | ||
Flock/Alcantra | Y | |||
Stencil/Mylar | Y | |||
Heat Transfer | Y | |||
Floor Laminate | Y | |||